S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Pull back the rear heat deflector to line up with the holes.
Blind rivet the heat deflector to the cross member
Install the screws, nuts and heat deflector on the rear cross member. Tighten all screws and nuts to 25 Nm.
Remove the pedal jack.
Fill and bleed the brake system
See Brake system, bleeding (using bleeding unit) See: Brake Bleeding/Service and Repair/Brake System, Bleeding (Using Bleeding Unit)
Pressure test the brake system
See Reconditioning front brake calipers See: Brake Caliper/Service and Repair/Overhaul/Reconditioning Front Brake Calipers
Replacing the brake pipe for the left rear wheel
Separate the brake pipe and brake hose