S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Remove the mechanical cable from its mountings (2).
Pull the mechanical cable from the floor until the welding rod is visible (3).
Remove the mechanical cable from the welding rod.
Note! Leave the welding rod in the hole in the floor.
Installation
Install the cable in the wheel unit
Lubricate the O-ring on the wheel unit lightly using petroleum jelly.
Install and press the guide lug for the cable sleeve into place in the wheel unit.
Note! This is important for the operation of the parking brake.
Install the expander on the mechanical cable