S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Position and apply mobile jack998 5972 JACK See: Tools and Equipment/998 5972 Jack under the left-hand side of the sub-frame.
Install the screws for the support bracket loosely.
Remove screws 999 5517 SCREW LEFT See: Tools and Equipment/999 5517 Screw Left and999 5518 SCREW RIGHT See: Tools and
Equipment/999 5518 Screw Right.
Install the screws for the sub-frame. Use 4newM14 screws. Lubricate the screw threads.
Note! The washer for the front screw.
Transfer the mobile jack to the right-hand side and repeat the procedure as above.
Tighten the screws to 105 Nm. Angle tighten 120°. Use bevel protractor 951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel
Protractor.
Tighten the support bracket screws. Tighten to 50 Nm.
Install the cross members