S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Crankshaft: Service and Repair
Crank Mechanism, Assembling
Crank mechanism, assembling
Special tools:
951 2767 Roller See: Tools and Equipment/951 2767 Roller
999 1801 STANDARD SHAFT See: Tools and Equipment/999 1801 Standard Shaft
999 5676 Drift replaced by 9997174 See: Tools and Equipment/999 5676 Drift Replaced By 9997174
999 5746 Holder See: Tools and Equipment/999 5746 Holder
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Note! For tightening torques not in the text, see Tightening torque See: Specifications/Tightening Torque.
Cleaning
Ensure that the all components are completely clean.
Blow clean the oil ducts in the block, intermediate section and sump.
Installing the piston cooling valve and nozzles
Install the piston cooling nozzles. Tighten the screws.
Install the piston cooling valve. Use a seal washer. Tighten. See Tightening torque See: Specifications/Tightening Torque.
Classification of main bearings