S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Oil Pressure Sensor: Service and Repair
Replacing the Oil Pressure Sensor
Replacing the oil pressure sensor
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Removing the oil pressure sensor
Remove the hose from the charge air pipe.
Remove:
-
the screw for the charge air pipe in the cylinder block
-
the connector from the oil pressure sensor
-
the oil pressure sensor. Use a long 24 mm socket.
Place paper underneath in case of oil leakage.
Installing the oil pressure sensor