S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Auxiliary Cabin Heater Fuel Hose/Line: Service and Repair
Replacing the Fuel Line For the Engine Coolant Heater
Replacing the fuel line for the engine coolant heater
Special tools:
951 2619 Pliers See: Tools and Equipment/951 2619 Pliers
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Preparations
Remove:
-
the splash guard under the engine
-
the air baffles
-
the wind deflectors.
Removing the fuel line for the engine coolant heater
Warning! Protective gloves and protective goggles must be used for the following operations. This is due to the risk of fuel spillage.
Remove:
-
the quick-release connector at the rear edge of the sub-frame
-
the hose clamp for the heater.
Hint: Use special tool 951 2619 Pliers See: Tools and Equipment/951 2619 Pliers (Oetiker pliers) to remove and to fasten the clamps.
Pull the pipe loose from the clip.