S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Remove:
the 4 x screws
the climate control module (CCM).
Installing the climate control module (CCM)
Install:
-
Climate control module (CCM). The control module is secured using 4 x screws
-
the front panel by pressing it so that the catches snap into place
-
the 3 x screws
-
the connectors.
Note! Check that there is no dirt in the optical connectors.
Note! The bend radius of the optic cables must not be less than 25mm
Angle in the infotainment/dashboard environment panel and its bracket.
Hint: Align the upper section and press it upwards so that the lower section can be worked in.
Front panel, replacing
Removing the front panel
Remove the climate control module (CCM). See: Removing the climate control module (CCM)