S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
Remove the nut for the battery leads. Disconnect the battery leads
-
Remove the screws on the left and right sides of the electrical box
-
Disconnect the lower section of the electrical box from the spring strut housing by pressing it in towards the engine compartment.
Installation
Note! For tightening torques, see: Tightening torque See: Specifications/Mechanical Specifications/Starting and Charging.
In reverse order.
Caution! Ensure that the seals are correctly positioned when installing the holder.
Note! Tighten screw 4 in the integrated fuse / relay box. Tighten to 2 Nm.