S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
Switch off the ignition
-
Disconnect the cable between the terminals on the relay base
-
Reinstall the fuel pump (FP) relay.
The line pressure must not fall below 200 kPa within 20 minutes of the fuel pump (FP) being shut-off.
Remedy as necessary.
Other information:
-
For the location of and to replace the injector on 5-cylinder engines, see Injector/pulse damper, replacement See: Fuel Pressure Pulsation
Damper/Service and Repair. For 6-cylinder engines, see
-
For the location of and to replace the fuel pump (FP) relay, see Central electronic module (CEM), replacing See: Computers and Control
Systems/Body Control Module/Service and Repair/Central Electronic Module (CEM), Replacing
-
For the location of and to replace the fuel pump (FP), see Right side fuel pump with level sensor See: Fuel Tank/Fuel Gauge Sender/Service and
Repair/Right Side Fuel Pump With Level Sensor
-
To disconnect the pressure gauge, see, Fuel pressure gauge See: Fuel Pressure Gauge.