S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Electronic Throttle Control Module: Service and Repair
Throttle body (electronic throttle module (ETM)), replacing
NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Preparation
Remove:
^
the air intake between the front cover plate and the air cleaner (ACL) housing
^
the charge air pipe between the charge air cooler (CAC) and the electronic throttle module (ETM).
Removing the electronic throttle module (ETM)
Disconnect the connector for the electronic throttle module.
Remove the 4 x screws for the electronic throttle module (ETM). Lift out the electronic throttle module (ETM). Discard the gasket.
Installation
NOTE: For tightening torques, see: Specifications.
Replacing the electronic throttle module (ETM)