S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
![background image](/volvo/s60_awd/l5-2.5l_turbo_vin_59_b5254t2/Page-867006.png)
-
Remove the screw
-
Remove clamp
Note! The clamp will be reused
Removing clamp:
-
squeeze clamp with a pipe wrench. Hold in place
-
pry apart with a small screwdriver.
Note! It is reusable.
-
Disconnect hose.
-
Remove cable harness.
-
Install the new pressure sensor, route cabling as before.
Installing clamp:
-
Press in the clamp with a pipe wrench until it locks.
Installing fuel tank