S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Not lit = the LED must not be lit.
Lit = the LED must be lit.
A/C ON LED
The parameter indicates whether the climate control module (CCM) recognizes whether the LED for A/C ON should be lit or not.
The LED is on the keypad for the climate control module (CCM).
Not lit = the LED must not be lit.
Lit = the LED must be lit.
A/C OFF LED
The parameter indicates whether the climate control module (CCM) recognizes whether the LED for A/C OFF should be lit or not.
The LED is on the keypad for the climate control module (CCM).
Not lit = the LED must not be lit.
Lit = the LED must be lit.
Left seat heater low LED
The parameter indicates whether the climate control module (CCM) recognizes whether the LED for left seat heater low should be lit or not.
The LED is on the keypad for the climate control module (CCM).
Not lit = the LED must not be lit.
Lit = the LED must be lit.
Left seat heater high LED
The parameter indicates whether the climate control module (CCM) recognizes whether the LED for left seat heater high should be lit or not.
The LED is on the keypad for the climate control module (CCM).
Not lit = the LED must not be lit.
Lit = the LED must be lit.
Right seat heater low LED
The parameter indicates whether the climate control module (CCM) recognizes whether the LED for right seat heater low should be lit or not.
The LED is on the keypad for the climate control module (CCM).
Not lit = the LED must not be lit.
Lit = the LED must be lit.
Right seat heater high LED
The parameter indicates whether the climate control module (CCM) recognizes whether the LED for right seat heater high should be lit or not.
The LED is on the keypad for the climate control module (CCM).
Not lit = the LED must not be lit.
Lit = the LED must be lit.
Blower fan control, red LED
The parameter indicates whether the climate control module (CCM) recognizes whether the red LED for the blower fan control should be lit or not.
Lit = the LED must be lit.
Not lit = the LED must not be lit.
Blower fan control, green LED
The parameter indicates whether the climate control module (CCM) recognizes whether the green LEDs for the blower fan control should be lit or not.
Not lit = the LED must not be lit.
1 lit = 1 LED must be lit.
2 lit = 2 LEDs must be lit.
3 lit = 3 LEDs must be lit.
4 lit = 4 LEDs must be lit.
5 lit = 5 LEDs must be lit.
6 lit = 6 LEDs must be lit.
7 lit = 7 LEDs must be lit.
AQS signal (only ECC)
The parameter displays the signal from the air quality sensor (AQS). The climate control module (CCM) uses the signal to regulate the damper motor