S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Alternatively use tool 951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool as illustrated.
Installation
Primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable,
The secondary lock
Press the secondary lock into place.
Finishing work
Install the relays.
Note! Take care with the positioning.
Install the relevant relay box.
Splicing the Cables
Splicing the cables
Strip the wire
Peel 5.0mm / 0.2 in of the insulation off the 4 cable ends (13/64 inches) using pliers951 2620 Stripping tool See: Tools and Equipment/951 2620
Stripping Tool.