S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Installation
Installing the front collision sensor
Install:
-
the connectors, 1 on each collision sensor
-
the 2 x collision sensors. Use 2 x M6 screws on each collision sensor. Tighten. See applicable specifications.
Note! Ensure that the collision sensor locating pins are aligned correctly against the cross member.
Finishing
Install the battery lead. See: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Close the hood.