S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
Take the cable harness from the kit and connect the blue (BL) cable in position 31 in the connector.
-
Refit the connector in the holder and reinstall the whole unit in the fuse holder.
-
Route the cable harness forward as far to the right-hand side as possible.
-
Secure the foam rubber covered cable (1) at the existing cable harness by the rear crossmember and by the fuse holder as illustrated. Use tie straps
(2) (from the kit).
-
Route the black ground lead (1) along the right-hand side of the cable duct (2) and into the passenger compartment.
-
Secure the cable at the cable duct. Use two tie straps from the kit.