S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
the connector (2) for the horn and the keypads
-
the three screws (3). Lift out the horn (4).
Applies to cars with pre-routed wiring
-
Press in the catch (1) on the connector for the right dummy button
-
Remove the connector from the dummy button.
-
Remove the screw (1) in the dummy button on the right hand side of the horn
-
Press in the catch (2). At the same time pull the dummy button from its socket. Place to one side. If there is pre-routed wiring, continue to
applicable procedure.
Note! If there is no pre-routed connector the horn must be replaced. A new one is in the kit.
-
Remove the screw (1) in the dummy button on the left hand side of the horn
-
Press in the catch (2). At the same time pull the dummy button from its socket.
Note! Keep the dummy button. The dummy button will be reused.