S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
the shock absorber
-
the screw. Tighten. See: Tightening torque See: Specifications.
Installing the brake caliper
Install:
-
the brake caliper
-
the 2 screws for the brake caliper. Use new screws. Tighten. See: Tightening torque See: Brakes and Traction Control/Specifications/Tightening
Torque
-
the ABS sensor
-
the screw for the ABS sensor. Tighten. See: Tightening torque See: Brakes and Traction Control/Specifications/Tightening Torque
-
the wheel. See: Installing wheels See: Wheels and Tires/Wheels/Service and Repair.
Installing the upper mounting for the shock absorber
Applies only to S60 and S80:
Install:
-
the nut for the upper mounting for the shock absorber. Use socket:999 5500 SOCKET UPPER NUT REAR SHOCK ABSORBER See: Tools and
Equipment/999 5500 Socket Upper Nut Rear Shock Absorber
-
soundproofing.
Fold back the front edge of the side panel in the cargo compartment. Install the clips.
Fold the rear seat backrest back into position.
Applies only to V70:
Install:
-
the nut for the upper mounting for the shock absorber. Use socket:999 5500 SOCKET UPPER NUT REAR SHOCK ABSORBER See: Tools and
Equipment/999 5500 Socket Upper Nut Rear Shock Absorber
-
the soundproofing
-
the front floor hatch.
Finishing
Raise the vehicle. Remove the spring striker plate:999 7079 striker plate See: Tools and Equipment/999 7079 Striker Plate and the restraining strap
between the control arms.
Lower the vehicle.
Check and adjust the alignment of the headlamps in accordance with: Headlamps, aligning See: Lighting and Horns/Headlamp/Adjustments.