S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
the brake disc
-
the brake disc locating pin/screw (M6). Tighten. See Specifications.
-
the brake caliper
-
the brake calliper mounting screws.
Use new screws. Tighten. See Specifications.
-
the wheel sensor cable to the retainer on the brake hose.
Installing the rear wheel
Install the screw, M10 to the drive shaft. Use a new screw. Tighten.
Install the rear wheel.
Position the vehicle on a wheel lift.
Tighten the screw of the spring strut/lower control arm. See Specifications.
Finishing
Adjust the parking brake.