S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Grind a groove in the inside of the sleeve to enable the expander999 5777 Extractor See: Tools and Equipment/999 5777 Extractor to get a hold.
The sleeve can also be heated with a hot-air gun or induction heater.
Installing tool
Install expander 999 5777 Extractor See: Tools and Equipment/999 5777 Extractor and puller rod 999 5777 Extractor See: Tools and Equipment/999
5777 Extractor (included in extractor 9995777) for the puller cylinder.
Puller cylinder 999 5575 PULLER CYLINDER USED WITH HYDRAULIC PUMP -5576 See: Tools and Equipment/999 5575 Puller Cylinder Used
With Hydraulic Pump -5576 is used together with hydraulic pump 999 5576 HYDRAULIC PUMP See: Tools and Equipment/999 5576 Hydraulic
Pump (foot-operated). Alternatively tool 999 2615 Hydraulic pump See: Tools and Equipment/999 2615 Hydraulic Pump can be used, which consists
of a puller cylinder and a compressed-air driven hydraulic pump.
Removing the connecting socket
Place a container underneath the gearbox. Ensure that the piston rod in the puller cylinder is in the outer position.
Position sleeve 999 5777 Extractor See: Tools and Equipment/999 5777 Extractor between the puller cylinder and the transmission. Press in the
expander so that it enters the groove on the connecting sleeve.
Apply the puller cylinder. Check that the socket between the gearbox and the puller cylinder is in contact with its support surfaces.
Remove the socket.
Removing the sealing ring from the gearbox