volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Removal and Replacement|Page 11434 > < Removal and Replacement|Page 11432
Page 8
background image

Install the spaceball in the front mountings first and lock them using the rear mounting.

Installing the top panel 

Install the top panel on the center console.

Installing gear selector knob 

Install the gear selector lever knob on the gear selector lever. Press the gear selector lever knob down. At the same time turn a quarter turn to the right.

Check the gear selector lever position in the space ball. It should be in the middle of the space ball. If the gear selector lever is not in the correct
position, check the transmission cable. See Transmission cable, adjusting.

Removal and Replacement|Page 11434 > < Removal and Replacement|Page 11432