S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Rear windshield sun blind
Preparations
-
Open the trunk lid
-
Lift the parcel shelf panel up slightly. Position the support blocks on the plate surface between the two right hand holes in the parcel shelf as
illustrated
-
Repeat the operation on the other side.
-
Locate the centre hole on the underside of the parcel shelf
-
Mark out and drill a - 8 mm (5/16") hole in the centre of the visible section of the parcel shelf above the hole as illustrated.
Installing the sun blind
-
Take out the sun blind (1). Insert the stud (2) in the newly drilled hole in the parcel shelf
-
Ensure that the sun blind is positioned parallel on the parcel shelf
-
Install the plain washer (3), the locking washer (4) and the nut (5) on the stud. Tighten the sun blind but not too hard yet.