S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
-
Remove the yellow protective film from one side of the tape
-
Secure the tape on the sensor holder
-
Carry out the above procedure on the remaining three sensor holders.
-
Remove the protective film from the orange pieces of tape on the sensor holders
-
Install the holders for the sensors. The narrow side must be pointing upward. Install horizontally in line with the bumper casing, as shown in the
figure.
NOTE: The tape adheres immediately.
CAUTION: Incorrect positioning of the sensors may result in partial or complete malfunction.