S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
-
Take the screw and the nut from the kit
-
Position the bracket and the connector over the drilled hole
-
If the bracket does not fit: mark on the bumper cover where the corner (1) needs to be cut away, then cut it. If the car has a protective panel on the
rear bumper, this may also need to be filed off
-
Tighten the bracket for the tow hitch member.
-
Lift up the floor hatch (1). Lift up the storage hatch (2). Remove these two hatches from the car
-
Remove the side panel (3) on the left-hand side.
-
Remove the screw (1) and the nut (2)
-
Remove the bracket (3) by pulling it forwards
-
Lift off the protective cover (4).