S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
-
Remove the control module connector cover.
-
Flip the anti-dazzle button toward the lens. Disconnect the connector in the control module by pressing the catch through the opening. Use a
screwdriver
-
Remove the screw from the control module
-
Remove the control module.
Check
Check that the control module connectors are intact.
Installing the control module
-
Screw the control module screw into place
-
Connect the connector for the control module
-
Reinstall the cover for the control module connector
-
Connect the 2 connectors
-
Press the bulb holder into place
-
Install the ground lead
-
Install the 2 screws at the front edge
-
Install the lens.