S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
-
Press the connector for the spoiler cable into place in the holder.
Applies to vehicles manufactured before year 3, week 10
-
Drill a hole in the tailgate to secure the cable for the spoiler mounted brake lamp. See the illustration. Use a 6.5 mm (17/64") diameter drill bit
-
Remove any swarf.
Note! Only drill through the first plastic layer. Use a drill stop.
-
Take the two tie straps and clips from the kit and press them into place in the drilled holes
-
Secure the cables using the tie straps.
-
Check the function of the brake lamp
-
Reinstall the panels on the tailgate
-
Post-tighten the screws for the spoiler to the correct torque. See point 12C.