S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Remove the marking on the shorter side of the air intake.
Use a 10 mm drift.
Place the drift in the center of the marking.
Knock out the marking using a hammer.
Adjusting the air intake housing for vehicles with an air
2
quality sensor, continued.
Remove:
-
the marking from the air intake housing
-
any residue left in the hole.
WARRANTY STATEMENT:
Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type 01.