S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Fuel Gauge Sender: Testing and Inspection
Checking the Fuel Level Sensor
Checking the fuel level sensor
Checking wiring and connectors
Check the wiring between:
connector terminal #5 for the fuel level sensors and rear electronic module terminal # A02 (#A2)
connector terminal #6 for the fuel level sensors and rear electronic module terminal #A10 (#A10)
connector terminal #7 for the fuel level sensors and rear electronic module terminal #A8 (#A8)
check for an open-circuit. Check for a short-circuit to supply voltage.
Check the relevant connectors. Check for contact resistance and oxidation.
Remedy as necessary.
Other information:
-
For further information about signals and other values, see Signal specification See: Body and Frame/Body Control Systems/Testing and
Inspection/Pinout Values and Diagnostic Parameters
-
To connect the breakout box, see Connecting the breakout box See: Body and Frame/Body Control Systems/Testing and Inspection/Pinout Values
and Diagnostic Parameters/Connecting the Breakout Box/Connecting Breakout Box, Rear Electronic Module (REM)
-
To access the integrated relay / fusebox in the cargo compartment, see Integrated relay/fuse box cargo compartment/rear electronic module,
replacing See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and Repair/Integrated Relay/Fusebox Cargo Compartment/Rear
Electronic Module (REM), Replacing
-
To access the connector for the fuel level sensors, see Left fuel gauge sensor See: Service and Repair/Left Fuel Gauge Sensor and Right side fuel
pump with level sensor See: Service and Repair/Right Side Fuel Pump With Level Sensor
-
Checking wiring and terminals. Permanent fault See: Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and
Terminals/Checking Wiring and Terminals. Permanent Fault.