S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Installation
Fuel gauge sensor
-
Position level sensor correctly
-
Install a new rubber seal
-
Connect the 2 connectors to the level sensor
-
Press tube system onto level sensor
-
Carefully position level sensor down with tube system and wires
-
Install level sensor attaching ring but do not tighten it
-
Press level sensor into position. Note position marks on cover and tank
-
Tighten lock ring, first by hand and then using special tool 999 5720 Wrench See: Tools and Equipment/999 5720 Wrench
-
Install wire in rubber seal slots
-
Connect the connector
-
Install level sensor cover
-
The rest of the section is done in reverse order.
Additional information
To replace fuel gauge sensor on right side, see Right side fuel pump with level sensor See: Right Side Fuel Pump With Level Sensor.