S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
-
Install the wire on the new ejector for the level sensor and pump
-
Insert the hoses and wiring into the tank via the right-hand tank hole
-
Grip the right-hand level sensor and pump holder and pinch it so that the float is held in its lowest position
-
Carefully and slowly lower the holder. Carefully work the holder into place
-
Pull the wire so that the hoses and wiring end up on the left side of the tank
-
Install the left-hand level sensor on the ejector
-
Install the switches on the underneath of the left-hand level sensor
-
Remove the wire from the ejector.
Finishing
-
Install the sensor, backrest, side cushion and seat cushion.