S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Alternative 2 (vehicles with protective sheath on the ignition cable)
Install the second tie strap at the light mark (1) on the protective sheath.
Install:
-
the third tie strap under the seat cushion
-
the airbag
-
the 2 M5 screws. Tighten to 6 Nm
-
the protective pad
-
the 2 elastic attachments on the inside/reverse of the backrest.
Pull down the backrest cushion upholstery so that the half moon clips can be installed.
Install:
-
the half moon clips, one on each side, in the front-rear channel down to the first lateral channel
-
3 half moon clips in the lateral channel
-
2 half moon clips per front-rear channel down to the base of the backrest
-
5 half moon clips in the underside of the backrest
-
the backrest adjustment knob. Press the backrest adjustment knob straight in. This applies only to manual seats
-
the side piece by pressing it straight in
-
the lumbar support adjustment knob. Press the lumbar support adjustment knob in and screw into position.
Reinstall the seat in the car.
Re-tension the lumbar support.