S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
-
Press in the catch (2). At the same time pull the dummy button from its socket.
Note! Keep the dummy button. The dummy button will be reused.
-
Remove the old horn. The horn will not be reused.
Installation
-
Take the new horn from the kit
-
Insert the new left dummy button in its socket
-
Press the dummy button until the catch engages
-
Install the screw. Tighten the dummy button
-
Connect the connector to the dummy button.
-
Take the remote control keypad (from the kit) and insert it in its socket
-
Press the keypad until the catch engages
-
Install the screw. Tighten the keypad
-
Connect the connector to the keypad.
-
Reinstall the horn, according to Steering wheel mounted remote control for the radio See: Relays and Modules - Steering/Steering Mounted
Controls Communication Module/Service and Repair/Steering Wheel Mounted Remote Control for the Radio. Ensure that the three springs are
correctly positioned. Check that the ground lead is not trapped
-
Tighten the screws crosswise. Tighten to 6.5 Nm (5 ft.lb)
-
Reinstall the ground lead. Tighten the ground lead
-
Connect the connector for the horn and the keypads
-
Check the function of the horn. Press the horn all the way round its circumference.