S70 L5-2.4L VIN 55 B5254S (1998)
6. Remove cylinder head:
-
Remove coolant pipe screws (2).
-
Undo cylinder head screws (working inwards).
-
Remove cylinder head.
-
Remove cylinder head gasket.
7. Clean:
-
mating faces exhaust manifold/cylinder head
-
engine block gasket face
-
coolant pipe gasket face
-
gasket face between upper/lower halves of cylinder heads
NOTE:
-
Do not use a metal scraper.
-
Use a soft putty knife and gasket solvent part No. 1 161 340-3, or equivalent.
-
Surfaces must be completely clean to ensure a seal.
WARNING: If gasket solvent is being used a fume hood or extractor must be used.
8. Align crankshaft timing marks:
-
Remove starter motor.
-
Remove plug.
-
Install locking tool No. 999 5451, or equivalent.
-
Turn crankshaft counterclockwise until it stops.