S70 L5-2.4L VIN 55 B5254S (1998)
Hose/Line HVAC: Service and Repair
Replacing Receiver/Drier or Suction Line
Special tools: 999 5474, 999 5472
TTTN1 Before starting work on the Receiver/Drier or suction line
WARNING! FOLLOW THE SAFETY PRECAUTIONS FOR WORK ON A/C SYSTEMS ACCORDING TO AC. SAFETY INSTRUCTIONS
WHEN HANDLING REFRIGERANT See: Service Precautions/Technician Safety Information
NOTE! Read the sections covering slow and quick leaks first, according to BG1. See: Service and Repair
NOTE! When replacing the Receiver/Drier always install new O rings in pipes and quick-release connectors. Always plug pipes and couplings when
working on the climate control system.
Removing Receiver/Drier or suction line
TTTN2 Preparations
-
First read TTTN1.
-
Disconnect battery negative lead.
-
Drain system of refrigerant according to BD and BF1. (See B above)
-
Remove fresh air intake to control module box.
TTTN3
-
Detach engine cooling fan (FC) relay and engine cooling fan (FC) motor cable from fan shroud.
-
Detach fan shroud.
-
Remove relay shelf and spacer washers.
-
Disconnect the engine cooling fan (FC) connector.
-
Disconnect the engine cooling fan (FC) motor connector.
TTTN4