S70 L5-2.4L VIN 55 B5254S (1998)
Turn Signal Switch: Service and Repair
EA1 Removing:
-
Position the steering wheel straight ahead.
-
Ignition off.
Remove:
-
steering wheel cover screws.
-
steering wheel covers. Push the upper one to one side.
-
switch screws.
-
Disconnect connector. Replace switch.
EA2 Installing:
CAUTION: The turn signal switch should be in the neutral position when it is installed. The pin that controls automatic cancel may otherwise be
broken off.
Install:
-
wiper and/or turn signal indicator switch. Ensure that the ground lead is positioned under the lower mounting screw when it is installed.
-
steering wheel covers and screws.
-
Test switch function.