S70 L5-2.4L VIN 55 B5254S (1998)
Pry out the stub axle.
Pull out the drive shaft and fold to one side. Hang up drive shaft on a hook 999 5045.
Note! Take care not to damage the drive shaft boot.
-
nut on ball joint. Use a Torx wrench as counterhold
-
stub axle.
Installing stub axle
Install
-
stub axle on the trailing arm
-
new nut on the ball joint. Tighten to 80 Nm. Use a Torx wrench as counterhold.
Note! Make sure that the mating surfaces on the ball joint and link are clean.