S70 L5-2.4L VIN 55 B5254S (1998)
Clutch Pedal Assembly: Service and Repair
1. Release clutch pedal
-
Remove panel under dashboard.
Cars with SRS: Remove kneeguard also.
-
Fold carpet back.
-
Remove clip holding clutch master cylinder pushrod to clutch pedal.
2. Lift off pushrod from clutch pedal.
NOTE: Hold pedal down to prevent it pushing up against the cruise control contact if fitted.
-
Now push clutch pedal down towards floor.
-
Lift assist spring off of clutch pedal.
3. Remove pedal from pedal assembly.
-
Remove clip, then pedal.
Check clutch pedal bushings.
-
Grease bushings with grease 1161241-3.
-
Install bushings on clutch pedal.
4. Fining new clutch pedal to pedal assembly.
-
Install a new clip on the pedal spindle.
-
Push pedal down and fit spring to pedal.
NOTE: Hold pedal down to prevent it pushing upwards against cruise control contact (if fitted).
5. Install:
-
Clip holding clutch master cylinder pushrod to clutch pedal.