S70 L5-2.4L VIN 55 B5254S (1998)
11. On right-hand drive models:
-
Lower sub-frame approx. 100 mm (4 inch).
-
Ensure that steering gear studs (five) and crash guard plate studs are clear of frame.
-
Remove bolts in anti-roll bar bearing cap on left-hand side.
-
Slacken bolts on right-hand side until held by just a few threads.
12. Lower sub-frame.
NOTE: Ensure that steering gear and guard plate are separated from frame.
-
Lower sub-frame to expose control system housing.
13. Removal:
-
Place container underneath transmission.
-
Remove oil pipe.
-
Undo clip securing oil temperature sensor cable, at point where cable is folded.