volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 8403 > < Reading and Clearing Diagnostic Trouble Codes|Page 8401
Page 36
background image

-

Ignition on.

Activate indicator LED.
The indicator LED should come on.

Fault Tracing Information

Fault Tracing Information

Condition

-

No diagnostic trouble codes (DTCs) stored.

Possible source

-

Short-circuit to ground in hood switch signal cable

-

Faulty hood switch.

Checking The Signal From The Hood Switch

Checking The Signal From The Hood Switch

-

Ignition on.

-

Hood open.

Read off the hood switch status.

The value should be HIGH when the hood is open.

Is the value HIGH?

Yes

-

Test complete

No

-

See: Checking Signal From Hood Switch/Checking For A Short-Circuit to Ground 

Checking For A Short-Circuit to Ground

Checking For A Short-circuit To Ground

Check the cable between VGLA control module #A3 and hood switch terminal 1 for a short-circuit to ground See: Diagnostic Trouble Code Tests and
Associated Procedures/Related Tests and Information/Checking Wiring and Terminals - Permanent Faults  
 
Were any faults found in the cable?

Yes

-

See: Checking Signal From Hood Switch/Verification 

No

-

See: Checking Signal From Hood Switch/Replacing Component

Reading and Clearing Diagnostic Trouble Codes|Page 8403 > < Reading and Clearing Diagnostic Trouble Codes|Page 8401