S70 L5-2.4L VIN 61 B5244S (2000)
Hydraulic Control Assembly - Antilock Brakes: Testing and Inspection
Repair/replacement of control module connector
Repair/replacement of connector.
It is important that the leads are connected correctly after repair/replacement of the connection Check therefore the leads connections before the
control module is connected
Carry out as follows
^
Ignition off
^
Connect adapter 951 1354 to the control module connector (to the cabling)
^
Connect the test box 981 3190 to the adapter
^
Control module disconnected
^
Follow the measurements given in the table Table of control module connector terminals.