S70 L5-2.4L VIN 61 B5244S (2000)
Install the brake pedal in the bracket
Angle the screw upwards as much as possible.
Install the brake pedal on the screw. Turn so that the pedal and screw are between the brackets. The pedal should be positioned over stop lamp switch
mounting and towards the dashboard lower edge.
Turn the pedal downwards past the stop lamp switch mounting. Do this before the screw is secured in the second brat Let.
Install the nut on the screw. Apply a little locking fluid to the screw.
Tighten the nut. Tighten to 25 Nm.
Install upper steering shaft
Insert the key in the steering wheel lock.
Pull the upper steering shaft down. Secure it on the lower steering shaft.
Install the nut. Tighten to 30 Nm.
Note: Use new screw and locknut.
Install:
-
the stop lamp switch.
-
the push rod and the clip.