volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Parking Brake Lever > < Brake Cable (Later Version), Replacement|Page 6060
Page 6
background image

Install: 
-

the cable end on the segment

-

the adjuster nut at the parking brake lever.

Install the center console

Replacing the parking brake lever.

Install the brake disc and the brake caliper with the holder 

Install the disc locating pin. Tighten to 8 Nm
Tighten the caliper holder mounting screws. Tighten to 60 Nm. Use new mounting screws.

Install the wheel 
Installing wheels.

Adjust the parking brake 
First tension the cable by pulling the lever to 400 N.
Adjusting the parking brake. Parking brake, brake shoes, replacing.

Parking Brake Lever > < Brake Cable (Later Version), Replacement|Page 6060