S70 L5-2.4L VIN 61 B5244S (2000)
-
see Replacing rear brake discs.
Remove the brake shoes
Remove the two securing springs on the brake shoes.
Press in the spring (1). Pull the spring sideways slightly so that it releases (2).
Detach the return spring at the expander.
Bend the brake shoes apart and remove them with the return spring and spacer.
Cleaning and checking
Check that no grease has leaked out of the wheel hub.
Check the parking brake expander for damage. Lubricate if necessary.
Clean the surfaces of the brake drum where the brake shoes make contact.
Check that hub flange is clean. Remove any rust.
Lubricate the contact surfaces on the brake shield. Use heat resistant grease, P/N 1161325-4.
Installation
Install the brake components