S70 L5-2.4L VIN 61 B5244S (2000)
-
Check that the variable valve timing unit does not rotate when tightening. Install the center plug and tighten to 35 Nm. Install the belt pulley on the
intake camshaft with three screws. Do not tighten yet.
99-01_b5xx4tx_vvt5a
-
Turn the timing gear pulley to the marking. Check that the markings on the timing gear pulley/intake camshaft and upper timing cover correspond.
Installing the timing belt
Install the belt in the following order:
1. The belt pulley on the crankshaft
2. The idler pulley
3. Cam wheel, intake camshaft
4. Water pump
5. Belt tensioner
-
Turn the variable valve timing unit clockwise to the stop.
Note: Hold the VVT unit fixed in the limit position clockwise when the belt if fitted.
-
Check that the markings on the belt pulley and the upper timing cover align.
-
Fix the timing belt over the exhaust camshaft's cam wheel.
Adjusting the belt tensioner
Note: This adjustment is done on a cold engine. A suitable temperature is approximately 20° C/68° F.