S70 L5-2.4L VIN 61 B5244S (2000)
Tighten the 3 screws on the timing gear pulley for the intake camshaft. Tighten to 10 Nm. Install the screw missing on the exhaust timing belt pulley.
Tighten the 3 screws on the timing gear pulley for the exhaust camshaft. Tighten to 20 Nm. Turn the eccentric back so that the indicator reaches the
marked position in the center of the window. Remember to hold the center screw secure at the same time.
Hold the eccentric secure and tighten the center screw. Tighten to 20 Nm.
Check that the indicator is in the correct position.
Remove:
-
the camshaft adjustment tools
-
the crankshaft stop.
Install the plug with a new sealing washer. Tighten to 40 Nm.
Checking the markings and belt tension
Check:
Press the toothed belt to check that the indicator on the tensioner moves easily.
Install the upper timing belt cover.
Turn the crankshaft 2 rotations and check that the markings on the crankshaft and camshaft pulleys correspond.
Check that the indicator on the belt tensioner is within the marked position.
Reinstall
Install:
-
the front timing belt cover. Tighten to 12 Nm
-
the cover over the ignition coils
-
the upper timing belt cover
-
the auxiliaries belt
-
the expansion tank
-
the servo reservoir. Check that the hoses are correctly positioned
-
the starter motor. Tighten the screws at the transmission to 40 Nm. Tighten the screw for the support bracket. Tighten to 25 Nm.
Remove the radiator protector.
Carefully lower the fan shroud. Align it with the holes at the sides of the radiator.
