S70 L5-2.4L VIN 61 B5244S (2000)
-
Carefully press in tool 999 5651 between the sealing ring and the camshaft. Carefully pry out the seals.
Cleaning
To clean the shaft journal and mating surface, use emery cloth P/N 951 1024
Note!
When cleaning work around the shaft journal, not in and out. It is essential that any residue from the emery cloth and any other
contaminants are completely removed before the new sealing ring is installed.
-
Oil the new seal.
-
Install the new seal for the intake camshaft using drift 999 5719
-
Install the new seal for the exhaust camshaft using drift 999 5718.
Remove the engine Cooling Fan (FC)
Remove
-
slacken off the brake vacuum hose from the intake
-
the air cleaner (ACL) housing intake pipe from the connection above the radiator. Twist the pipe up
-
the manifold absolute pressure (MAP) sensor from the front cover plate