S70 L5-2.4L VIN 61 B5244S (2000)
Raise the electronic throttle module (ETM) and place it between the radiator and the intake manifold.
Place paper under the electronic throttle module (ETM).
Clean the throttle and bore as follows.
Note!
Do not use compressed air when cleaning the electronic throttle module (ETM).
Cleaning the ETM
Warning!
DO NOT submerge throttle unit in cleaning solvent. ONLY use cleaning solvent recommended in this TNN.
Important!
Do not scrape or use a rotary wire brush to clean the unit.
Clean the ETM bore using cleaner (P/N 11 61 828) and a soft bristle brush. Ensure that all the residue is removed from the shaded surfaces shown in the
illustration.