S70 L5-2.4L VIN 61 B5244S (2000)
Identify two spliced cable pairs (4 cable slices) 2 brown and 2 black cables. These cables may be black-white and brown-white.
The cable colors can be as illustrated.
Expose cable splices by pulling them out
Cut one cable pair
Caution: Only cut one cable pair at a time so as to avoid confusion. Take great care not to damage other cables. Use good lighting when cutting
cables!
One cable splice can be pulled forward relatively easily.
Try to pull the other cable splice to the same as the cable harness.
If this is not possible cut the cable pair as close to the cable splice as possible and pull out sideways. Locate and pull out the other end of the cut cable
pair.
Joining:
^
Thread 2 heat-shrink tubes onto the new ABS sensor cables.