S70 L5-2.4L VIN 61 B5244S (2000)
Press in the bushing inner sleeve so that it is 12.5 mm (0.49 inch) outside the control arm plane.
Use drift 999 5481 and counterhold 999 5482.
Press in the front bushing
Use gauge 999 5483. Hold the gauge against the bushing inner sleeve, see illustration. If necessary; Adjust the front bushing position at A.
Note! The measurement between the bushing inner sleeves at the point the gauge is held against should be 254.5 [plusmn] 0.5 mm (10.0 [plusmn]
0.0197 inch).
Install the control arm to the sub-frame