S70 L5-2.4L VIN 61 B5244S (2000)
Wiper Motor: Service and Repair
NOTE:
-
If the link arms are out of position start repair with CA11. See: Wiper Motor Linkage/Adjustments
-
Reinstall the special suppression kit if installed.
Removing:
CA1 Preparations:
-
Ignition off.
-
Check whether the wiper motor is in its parked position, switch the wiper switch to the on position and then to the parked position.
CA2 Removing Wiper Arms:
Remove:
-
nut, unscrew a few turns to protect the thread on the wiper mechanism spindle.
-
wiper arms from wiper arm mechanism by supporting a pipe wrench on the nut and pressing off the arm.
Remove nut.
CA3 Removing Panel:
Remove:
-
cover screws.