S70 L5-2.4L VIN 61 B5244S (2000)
-
wiper motor screws.
-
wiper motor.
Installing:
CA7 Installing Wiper Motor:
Connect 12 V to the wiper motor to ensure that the wiper motor goes to its parked position.
Install:
-
wiper motor.
-
screws.
-
crank link as marked.
-
Apply thread sealant P/N 1161053-2 to the motor spindle thread.
-
Tighten nut to 20 Nm (14.8 ft.lbs). Use a 20 mm (0.79 in) fixed wrench as a counterhold on the crank link when tightening the nut.
-
Connect connectors and clamp wiring.
CA8 Installing Wiper Unit:
-
Install wiper unit, locate mounting pin and install screws.
-
Connect connectors.
-
Test wiper unit function.
CA9 Installing Panel:
Install:
-
cover.
-
drain hoses.
-
cover screws.